2. Separate the stabilizer links from the stabilizer bar on the right and left.
3. Remove the flange bolts (A) and bushing holders (B), then remove the bushings (C) and stabilizer bar (D).
4. Installation of the stabilizer bar is performed in the reverse order of removal, taking into account the following:
- When assembling, install new self-locking nuts.
- Observe the installation direction of the stabilizer bar on the right and left sides.
- Align the paint marks (A) on the stabilizer bar with the ends of the bushings (B).
- Observe the installation direction of the bushing holders front/rear.
See the procedure for connecting the stabilizer bar to the rods in the section "Replacing the stabilizer rod".