Note:
- The parking brake cables must not be bent or deformed. Otherwise, this will lead to harsh operation and premature failure of the cable.
- When replacing, refer to the exploded view image.
1. Raise the rear of the vehicle and support it securely.
2. Release the parking brake lever completely. Move the driver's seat (on right-hand drive vehicles: passenger seat)forward.
3. Roll the floor mat under the seat. Remove the screw and bolt from the parking brake equalizer cover (A).
4. Remove the return spring (A).
5. Loosen the adjusting nut (A) in the brake equalizer and disconnect the parking brake cable ends (B) from the equalizer.
6. Remove the cable guide base (C).
7. Remove the rear wheel brake pads and disconnect the parking brake cable from the pad.
8. Remove the flange bolts (A) and disconnect the parking brake cable (B) from the support plate (C).
9. Install the parking brake cable in the reverse order of removal, taking into account the following:
- Do not bend or deform the cable.
- Perform a major adjustment of the parking brake.