Note:
- Avoid scratching the instrument panel and adjacent components.
- The picture shows a left-hand drive model; the arrangement on the right-hand drive model is symmetrical.
1. Remove the center dashboard tray.
2. Tighten the parking brake lever.
3. Remove the screws (A), pull the heater control panel (B), and release the clamps (C) and hook (D). Disconnect the connector (E) from the heater control unit, and then remove the heater control panel.
4. The panel is installed in the reverse order of removal. Make sure the heater control unit connector is connected securely.
(The original is located on the website: HondaBook)