Note:
- Wear protective gloves.
- When pressing components with a flat-head screwdriver, wrap it with protective tape to avoid damage and apply tape to adjacent components.
- Avoid scratching the instrument panel and adjacent components.
- The picture shows a left-hand drive model; the arrangement on the right-hand drive model is symmetrical.
1. Remove the center section of the instrument panel.
2. Using a flat-blade screwdriver, pry up the top section of the cover (A) and release the hooks (B) and lower hooks (C), then remove the cover. Remove the screw.
3. While holding the instrument panel center tray mounting screw section (A) with your hand, pull the tray and release the clips (B, C) and hooks (D), then remove it.
4. Install the tray in the reverse order of removal.
(Original published on this resource: «HondaBook.ru»)