Left hand drive models
Note:
- Installation is carried out in the reverse order of removal.
- After installation, adjust the damper drive cables.
- After installation, make sure the switches are working properly.
1. Remove the instrument panel center trim (see the relevant section of the chapter "Body").
2. Remove the rear window defogger switch, air conditioner switch and passenger airbag indicator.
3. Remove the handles, unscrew the screws and remove the switch block.
1 - handles,
2 - air conditioning and heating control panel.
Right hand drive models
Note:
- Installation is carried out in the reverse order of removal,
- After installation, adjust the damper drive cables.
- After installation, make sure the switches are working properly.
1. Remove the instrument panel center trim (see the relevant section of the chapter "Body").
2. Remove the radio or multifunction display.
3. Remove the switch handles, unscrew the screws and remove the switch block.
Manual air conditioner:
1 - handles,
2 - screws.
Air conditioning with automatic control.
1 - handles,
2 - switch block.
(The original can be found on the resource «www.HondaBook.ru»)