Note:
- When pressing components with a flat-head screwdriver, wrap it with protective tape to avoid damage and apply tape to adjacent components.
- Avoid scratching the instrument panel and adjacent components.
- The picture shows a left-hand drive model; the arrangement on the right-hand drive model is symmetrical.
1. Remove the lower instrument panel cover on the driver's side.
2. Remove the upper steering column cover.
3. Carefully pull the instrument panel (A) along the lower edge and release the clips.
4. Remove the instrument panel (A).
- Gently pull the top of the instrument panel and release the clips (B, C) and hooks (D, E, F, G).
- Gently pull the instrument cluster, being careful not to bend the trip meter/reset button (H) and the instrument cluster backlight dimmer (on some models).
- On vehicles with automatic transmission, guide the selector lever (I) through the hole in the instrument panel.
5. Installation of the instrument panel is performed in the reverse order of removal.
You will find the original on the portal: hondabook