Checking the longitudinal tilt of the front wheel steering axis (Honda CR-V 2)

1. Raise the car and place the steering angle measuring stands under the front wheels, and place boards of the same thickness as the stands under the rear wheels, then lower the car.

Note: Make sure that the vehicle wheels are level on the steering angle measuring stands and on the boards.

2. Remove the wheel cap and install the wheel alignment tool (A) and the front camber and caster angle measuring device on the wheel hub and apply the front brakes.



3. Turn the front wheel 20° outward, then turn the adjustment screw so that the bubble in the front wheel camber and steering axis angle meter is set to 0°.

4. Turn the front wheel 20° inward and read the longitudinal tilt angle of the steering axis by bringing the bubble to the center of the device. If the angle is different from the norm, check for bent or damaged components in the suspension.

Angle of longitudinal tilt of the pivot axis: 1°45'±1°