Checking the axial clearance in the hub bearing
1. Jack up the front of the car and place it on stands.
2. Remove the front wheel.
3. To hold the brake disc (drum), tighten the nuts to the specified torque.
- Tightening torque - 108 Nm
4. Install the dial indicator "A" on the wheel hub (see figure).
5. By pushing and pulling the wheel hub with your hands in the axial direction, measure the axial clearance in the wheel bearing.
- Bearing clearance - 0-0.05 mm
If the wheel axial clearance exceeds the established norm, replace the bearing.