IMRC Valve Replacement (Honda CR-V 2)

1. Remove the intake manifold.

2. Disconnect the vacuum hose (A).



3. Unscrew the bolts (B).

4. Remove the IMRC actuator assembly (C).

Note.

• When installing the IMRC actuator, check if necessary that the bearing (E) is firmly seated.
• Do not allow the IMRC assembly to come into contact with the intake manifold (F).
• When installing the IMRC actuator, install new O-rings (D).

5. Install the IMRC actuator assembly (A), then check if the hole (B) is visible.



6. Turn the IMRC actuator assembly (A) and insert the bolts into the holes.

Note: When rotating the IMRC actuator assembly, make sure that the stopper (B) and groove (C) are aligned.