Note: Wear protective gloves.
1. Remove the tail light.
2. Loosen the bolt (A) and remove the clip (B) at the rear of the rear roof side trim (C).
3. Using a flat-blade screwdriver wrapped in protective tape, pry up the rear cover of the front side roof trim, release the hook and remove the screw.
4. Release the rear side roof trim (A) from the clips (B, C) by sliding the trim rearward and remove the trim. Avoid scratching the body.
5. Replace damaged clamps (A, B).
6. Remove the clips (A, B) from the body and insert them into the rear side roof trim (C).
7. Insert the rear side roof trim into the front side roof trim (D) and insert the clips (A, B) into the holes in the body, then press them until they are in place.
8. Tighten the bolts and install the covers.
9. Install the rear light.