Note: Do not scratch the body.
1. Remove the front inner fender (A).
- From inside the wheel arch, remove the screws (B), then remove the front mudguard (C).
- Using a T30 Torx head, remove the bolt (D) securing the front wheel well protective cover.
- From under the front bumper (E), remove the bolt (F) securing the front bumper, mudguard (G) and front inner fender.
- Remove the clips (H) securing the front inner fender from the wheel well (and mudguard) to the body.
- Unhook the mudguard hook (I), then remove the front inner fender.
2. Installation of the inner wing is performed in the reverse order of removal. Replace damaged clamps.