Note:
- Don't scratch the door.
- Wear protective gloves.
1. Open the front or rear side door fully, remove the plug (A) from the door, then remove the screw.
2. When removing the rear side door lower trim, close the rear side door halfway.
3. Slide the lower door trim (A) forward and remove it. The clamps (B, C) will remain in the body.
4. Remove the clamps (B, C) from the body.
5. Replace damaged clamps.
6. Insert the clips (B, C) into the lower door trim, then secure the middle clip (front door) (C) or front clamp (rear side door) (C) the screw that you unscrewed in p. 1. Make sure the clamps are not upside down.
7. Position the trim and insert all clips into the holes in the door, then press down on the trim until the clips are in place.
8. Insert the plug into the door.
[The original text of the article is located on the website: www.hondabook.ru]