Note: Wear protective gloves.
1. Using a flat-blade screwdriver wrapped in protective tape, pry up the front cover (A) of the front side roof trim, release the hook (B) and remove the screw.
2. Using a flat-blade screwdriver wrapped in protective tape, pry up the center cover (A) of the front side roof trim (B), release the hook (C) and unscrew the bolts.
3. Using a flat-blade screwdriver wrapped in protective tape, pry up the rear cover (A) of the front side roof trim (B), release the hooks (C) and unscrew the bolts.
4. Separate the pin (A) by pulling the front section of the front roof side trim (B) upward and remove it.
5. Release the trim from the clips (C, D, E) and unhook the hooks (F) by sliding the trim back and remove the trim. Avoid scratching other trim and bodywork.
6. Replace damaged clamps (A, B, C).
7. Remove the clips (A, B, C) from the body and insert them into the front side roof trim (D).
8. Insert the clips (A, B, C) into the holes in the body, then press them until they snap into place.
9. Tighten the bolts and install the covers.
[Full text available on the portal: HONDABOOK.ru]