Note:
- Wear protective gloves.
- To avoid damage, place the rear door glass in a safe place.
- Do not damage the wires and contacts of the rear window heater.
Disassemble the rear door glass as shown in the figure below, taking into account the following:
- Unscrew the bolts using a Torx T30 head.
- When removing, see. chapter "Replacing the rear window molding".
- When removing the high brake light bracket and the trim channel of the electrical harness, see. chapter "Replacement of the high brake light bracket/decorative channel of the electrical harness".
Assemble the rear door glass in the reverse order of disassembly. When installing the rear "H" emblem and sticker "REALTIME 4WD" see section "Replacement of emblem/sticker".
