CR-V
1. Disconnect the battery from the ground.
2. Disconnect the male connector and the white wire on the rear cover from the generator
3. Turn away a nut of an adjusting bolt and remove a belt.
4. Remove the through bolt and remove the generator.
5. After assembly, adjust the belt tension.
4-cylinder Odyssey
1. Disconnect the battery from the ground.
2. Remove the power steering pump (Ch. 8).
3. Disconnect the male connector and the white wire on the rear cover from the generator
4. Turn away a nut of an adjusting bolt and remove a belt.
5. Remove the through bolt and remove the generator.
6. Installation is carried out in the reverse order. After assembly, adjust the belt tension.
Odyssey V6
1. Disconnect the battery from the ground.
2. Remove the belt by releasing the tensioner pulley bolt.
3. Disconnect the male connector and the black wire on the rear cover from the generator
4. Turn away bolts and remove the generator.
5. Installation is carried out in the reverse order. After assembly, adjust the belt tension.