To prevent failure of the ABS system, disconnect the control unit when performing welding work, do not expose the devices and devices of the system to elevated temperatures (the system should not be at a temperature above 95°C for no more than 15 minutes). It is forbidden to disconnect the connectors of the control unit or valve block with the ignition on, do not disassemble maintenance-free units. It is forbidden to independently repair and adjust the system units, with the exception of dismantling the units in connection with the performance of engine or suspension repair work. If the ABS warning lamp on the instrument panel starts to glow, contact a car service.
Attention! When you press the brake pedal, you may hear a characteristic noise and feel the pulsation of the pedal, which is caused by the activation of the ABS system and is not associated with any malfunction.