Replacing the thermostat (Honda CR-V 2)

1. Remove the drive belt.

2. Remove the mud deflector.

3. Disconnect the lower hose, then remove the thermostat.

4. Install the thermostat with a new O-ring, then connect the lower hose.

5. Install the dirt deflector.

6. Fill the radiator with engine coolant and bleed the cooling system by opening the heater valve.

(The text of the article is available on the website «HONDABOOK»)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Mikhail Kopasov

◀ Previous

CR-V 2: Cooling system

Next ▶

Replacing the coolant
Checking the coolant
Replacing the water pump
Checking the water pump
Testing the thermostat

Installing a water bypass pipe
Installing the exhaust pipe
Replacing the radiator and fans
Fan control
Troubleshooting the Radiator Fan Circuit