2. Lower the head restraints.
3. While holding the lever in the raised position, lower the seatback and lock it.
4. Pull the belt to lift the seat forward.
5. Remove the retaining straps.
6. Place the retaining strap ring over the pin at the bottom of the front seat.
7. Adjust the length of the retaining strap so that it does not slip off the pin.
Returning the seats to their original position
1. Loosen the retaining strap and remove the ring from the pin.
2. Return the seats to their original positions.
3. Tuck in the retaining straps.
4. While holding the lever in the raised position, lift the seatbacks and set them to the desired position. Make sure the seat is locked in place.
Full folding front and rear seats
The seats recline independently.
1. Press the buttons and remove the front seat headrests.
2. While holding the seat adjustment lever in the raised position, move the front seats forward as far as possible.
3. While holding the seat adjustment lever in the raised position, move the rear seats back as far as possible.
4. While holding the seatback tilt adjustment lever in the raised position, lower the seatback back and lock it in this position.
5. While holding the seat adjustment lever up, move the front seats rearward until there is no gap between them and the rear seats.
6. While holding the seatback tilt adjustment lever in the raised position, lower the rear seatbacks backward.
Returning the seats to their original position is done in reverse order.
Reference.
- When folding and unfolding the seats, make sure they are securely fastened.
- Seat belts can also be used when the seats are fully reclined. There are special buckles for this.
Luggage compartment
If you fold the rear seats, you can increase the volume of the luggage compartment.
1. Move the rear seats back as far as possible.
2. Lower the rear seat backs and lock them in place, then lift the seats and lock them in place
The seats can be folded and raised independently.