To adjust the longitudinal position of the seats, move the lever up and move the seat to the desired position. After adjustment, return the lever to its original position.
2. Adjusting the position of the front seat backrests.
To change the angle of the seatback, lean forward slightly, pull up on the seatback locking lever, then lean back to the desired position and release the lever. The seatback will lock in this position.
3. Adjusting the height of the front seat cushion.
Height: The seat cushion can be adjusted by turning the adjustment wheel.
4. Folding the rear seats to increase the luggage compartment.
a) Move the front seats as far forward as possible.
b) Release the seat back locks by pulling the latches as shown in the figure and fold the seats.
5. Folding the rear seat cushion.
- a) Pull the seat cushion up.
- b) Fold the leg.
- c) Press the pillow as far as it will go against the backrest so that it is fixed.
To lower the rear seat cushion to its original position:
- a) Lift the seat cushion leg to release the cushion lock.
- b) Lower the seat cushion down.
- c) Fix the leg in the fasteners.
ISOFIX child seat anchorages
Special additional ISOFIX fastenings are intended for child seats, providing greater safety for children while driving. The fastenings securely fix child seats and prevent them from tipping over in a collision.
The ISOFIX mountings are located between the rear seat cushion and backrest, as shown in the illustration.
Child seats are inserted into ISOFIX mountings.
(Original material on the website HondaBook.ru)