Adjusting the steering column and rear view mirrors (Honda CR-V 2)

Steering column

Press the steering column tilt lever to set the steering wheel to the desired position, return and lock the lever in its original position.

Interior rear view mirror, switching

The mirror switches when the car behind you blinds you with its headlights.

Pull the mirror lever towards you - this will reduce the reflected light from the headlights of cars behind you.

External rear view mirrors

The rear view mirrors can be operated when the ignition key is in position II. The mirrors can be folded automatically using the corresponding switch.





If the ignition key is in position 0 or I, the mirrors are controlled manually.

Note: If the ignition key is turned to position II after manually adjusting the mirror position, the mirrors automatically return to the position determined by the switch.

Adjusting the angle of rotation

The mirror angle can be controlled when the ignition key is in position II.

1. Use the switch to select left or right mirror.



2. Use the regulator to set the desired tilt of the mirrors.





Adjusting the angle of rotation of the mirrors is also possible manually.

Heated mirrors

Mirror heating is activated after door mirror heating is turned on (in combination with rear window heater), when the ignition key is in position II.

To turn off the heating, press the button again. At this point the indicator goes out.

Note: Long-term use of heated mirrors may cause the battery to drain quickly.

Front left side view mirror (for parking)

Provides a view to the front left side when parking.

It is not possible to change the angle of rotation of this mirror.