Windscreen wiper arms
1. Unscrew the lever axle nut.
2. Mark the position of the lever on the axle.
3. Press the lever several times approximately 100 mm from the axle until the lever comes off the axle cone.
4. While holding the lever on the axle, move the lever up until it locks in this position.
5. Remove the lever from the axle.
6. Installation is carried out in reverse order.
Rear Window Wiper Arms
The procedure for removing the wiper arm is no different from that discussed for the windshield.
 |
 |
[The article was taken from the website «hondabook»]