Contents: Removal ⇊ Installation ⇊
Removal
1. Disconnect the battery from ground.
2. Disconnect the wiring from the master cylinder.
3. Remove fluid from the master cylinder, disconnect the pipes.
4. Remove the master cylinder from the booster.
5. Disconnect the vacuum hoses from the booster.
6. Unpin and remove the brake pedal axle.
7. Loosen the mounting bolts and remove the amplifier.
Installation
8. Installation is carried out in reverse order.
9. Fill the cylinder with DOT 3 or DOT 4 brake fluid and bleed the air.