Contents: Removal ⇊ Installation ⇊
Removal
1. Disconnect the wires from the switch.
2. Loosen the lock nut.
3. Unscrew the switch.
Installation
4. Install and adjust the switch, turning it up to the pedal limiter (the switch stem should not be visible). Loosen the switch by 1/4 turn and set the gap to 0.3 mm between the switch and the limiter. Connect the connector.
5. Tighten the lock nut and connect the wiring.
To adjust the switch, loosen the lock nut and rotate the switch to set the required clearance: 1. Lock nut; 2. Limiter