Control of CD changer, CD/MD player, cassette tape recorder (Honda CR-V 2)

1. Selecting a playback device (cD/AUX button)

Pressing this button connects the CD changer, CD/MD player and cassette recorder in series:

2. Selecting a disk (DISK-/DISK+ buttons)

By pressing these buttons you can select the number of the desired disk. Then pressing the buttons , you can select the entry number.

Fast forward/rewind playback, skip and repeat recordings

Click on one of the buttons .

Fast forward playback (repeat previous entry)

Fast forward playback (skip current record)

• If you hold the button down, the current recording will be played at fast forward (cUE - forward or REW - backward lights up on the display).
• If you press the button briefly, you will go to the previous/next entry.

Search for a record (scanning disks and records)

• If you press the SCAN button briefly (the display will show SCAN and the entry number will flash), 10 seconds of the beginning of each recording will be played.
• On the desired entry, press the button again and scanning will stop.
• To scan disks, press and hold the button until you hear a beep (the display will show D-SCAN and the disk number will flash). Will play 10 seconds from the beginning of the first recording of each disc in the CD changer.
• To stop scanning, press and hold the button again until you hear a beep.

Repeat playback of the current recording

• To listen to the current recording again, briefly press the RPT button (rPT will light up). To turn off repeat mode, press the button again.
• To enter the disc repeat mode, press and hold the RPT button until you hear a beep (d-RPT will light up on the display). The disc that is currently playing will be played repeatedly.
• To turn off repeat mode, press and hold the button again until you hear a beep.

Listen to recordings in random order

• To listen to the tracks on the disc in random order, briefly press the RDM button (rDM will light up). To turn off this mode, press the button again.
• To listen to discs in random order, press and hold the RDM button until you hear a beep (the display will show D-RDM).

All discs in the CD changer will be played in random order.

To turn off this mode, press and hold the button again until you hear a beep.

Cassette recorder

Fast forward/reverse playback of a tape, rewinding with the playback head raised

Control is carried out using buttons .

Fast forward, skip to the beginning of the current recording

Fast forward playback, skip to the beginning of the next recording

• If you press and hold the button until you hear a beep, fast forward (rewind) will begin and the display will show FF (REW).
• Pressing the button briefly will move to the next one (the beginning of the current) recording with the playback head raised, the display will flash FF(REW).

Note: The skip to next/start of current recording function may not work if the interval between recordings is less than 4 seconds.

Switching the playback direction of an audio cassette

To switch the playback direction, press the 6 (◄►) button. When one side of the tape is completely played, switching occurs automatically.

Repeat playback of the current recording

To replay the current recording, press the RPT button (rPT will light up). To turn off repeat mode, press the button again.

Listening to recordings with the DOLBY NR noise reduction system

The noise reduction system is switched on and off using the 5 (NR) button. When the system is operating, the icon lights up .

Audio system malfunctions and their designations

If any audio device malfunctions, a fault code will be displayed on the display screen.



CD main device

CD-R external CD player

CD-C CD-changer-1

MD-P MD-disc player

TARE cassette recorder

Fault code	Cause of malfunction
	Mechanical failure, for example, it is impossible to install or remove the disk
	Mechanical failure, for example, it is impossible to remove an audio cassette
	Stop working due to overheating inside the audio device
	The disc's readable surface is dirty or the disc is inserted upside down
	There is no disc in the player

Watch

The clock displays the current time when the ignition key is in position "I" or "II".

Setting the readings

1. Press and hold the CLOCK button until a beep is heard (the indicator starts to flash (CLOCK))-

2. Set the clock by pressing button 1 (H)

Set the minutes by pressing button 2 (M)



3. Click on the button (CLOCK) again.

Setting the exact time signal

While the time signal is sounding, press button 3 (R).

Example:

• If the clock display is between 1:01 and 1:29, then after pressing button 3 (R), the clock will display 1:00.
• If the clock display is between 1:30 and 1:59, then after pressing button 3 (R), the clock will display 2:00.