Contents: Radio ⇊ CD player ⇊ Radio tape recorder ⇊ Radio ⇊ CD player ⇊ CD audio disc ⇊ MP3 audio disc ⇊ Mini Disc Player ⇊
Radio
The quality of radio signal reception may vary significantly while the vehicle is moving due to terrain features, weather conditions, and proximity to sources of electromagnetic radiation.
CD player
In cold weather or high humidity, due to fogging of the disc surface and optical elements of the player, playback failures are possible. After normalization and humidity, the system operation is restored.
Strong vibration may cause distortion and interruptions in playback, this is not a malfunction. It is not recommended to leave discs in direct sunlight. Protect the disc surface from scratches.
Radio tape recorder
Turning on and off
The audio system is switched on by pressing the (1) "PWR" button (the system that was working before the last switch-off will be switched on).
Volume control
The volume is adjusted with the button (1) extended. Turn the knob (1) to the right to increase the volume and to the left to decrease it.
Adjusting tone and balance
Type 1
The adjustment is carried out by button (8). Switching between the adjustment parameters is carried out by pressing button (20). In this case, the name of the parameter and the set value are displayed on the display.
Type 1.
Type 2.
Type 2
The adjustment is carried out by button (8). Switching between the adjustment parameters is carried out by pressing button (8). In this case, the display shows the name of the parameter and the set value:
- BAS - low frequency timbre;
- TRE - high frequency timbre;
- FAD - balance between front and rear speakers;
- BAL - balance between right and left speakers.
Radio
The radio is turned on by pressing the button (10). Pressing this button again switches the range (AM and FM).
Tuning radio stations
When you press the button (13) "SEEK" the automatic search of the radio station will be turned on. The search will stop when a stable signal is found. If the signal is weak, if the automatic search does not fix the setting, press the tuning button again (the automatic search will be turned off) and tune manually one step at a time using the knob (8) "TUNE".
During stereo reception, the "ST" indicator appears on the display.
Programming settings
The settings of the most frequently listened to radio stations can be saved into memory. To do this, tune in to the desired radio station, then press and hold one of the buttons (2-7) until a beep is heard. Switching to the tuned radio station is done by briefly pressing the desired button.
Note: if the batteries are absent for a long time, the radio memory is erased and factory settings are restored.
Browse radio stations
Type1
Press and release the (18) "SCAN" button, the automatic search and playback of radio stations will begin. The found radio station will be played for 10 seconds, then the search will continue. To stop, press the "SCAN" button again.
Type 2
Press and release the button (16) "SCAN": automatic search and playback of radio stations will begin. The found radio station will be played for 5 seconds, then the search will continue. To stop, press the "SCAN" button again.
Information on the situation on the roads
This function is selected using button (12). This function does not work in the Russian Federation.
Note: New radios are tuned to 1620 kHz.
CD player
Type 1
Switching to the CD player mode is done by pressing the button (9) "DISC"/
Loading the disk
Insert the disc into the loading slot.
Note: Do not insert one disc on top of another, do not insert the disc backwards.
Ejecting the disc
To eject the disc, press the button (14).
Rewind
Press and hold the bottom of the button (13) to rewind or the top of the button (13) to fast forward. Rewinding will stop when you release the button.
Repeat recording
To play the current recording repeatedly, press and hold the button (18). The display will show "RPT". To turn off the repeat, press the button again.
Quick view of the disk
Pressing the button (18) plays 10 seconds of each recording of the current disc in order. The display will show "SCAN". Pressing the button again will continue playing the current melody.
Random selection of records
To play the current disc's records in random order, press the button (19). The display will show "RDM". To continue playing the record, press the button again.
Type 2
Switching to the CD player mode is done by pressing the (9) "DISC" button.
Loading a disc. Insert the disc into the loading slot.
Note: Do not insert one disc on top of another, do not insert the disc backwards.
Ejecting the disc
To eject the disc, press the button (14).
CD audio disc
Rewind
Press and hold the bottom of the button (13) to rewind or the top of the button (13) to fast forward. Rewinding will stop when you release the button.
Repeat recording
To play the current recording repeatedly, press the "RPT" button (5). The display will show "RPT". To turn off the repeat, press the button again.
Quick view of the disk
When you press the button (16), 10 seconds of each recording of the current disc are played, in order, the display will show the inscription "SCAN". When you press the button again, the current melody will continue playing.
Random selection of records
To play the current disc's records in random order, press the button (4). The display will show "RDM". To continue playing the record, press the button again.
MP3 audio disc
Select folder
To select the next folder with records, press the upper part of the button (13), to select the previous folder, press the lower part of the button (13).
Selecting a Recording
To select the desired entry in the current folder, turn the switch (8) to the left to select the previous entry or to the right to select the previous entry.
Quick view of folder
Pressing the button (16) plays 10 seconds of each entry in the selected folder.
Quick view of the disk
Pressing and holding the button (16) until a beep plays 10 seconds of the first entry in each folder.
Repeat recording
To play the current recording repeatedly, press the (5) "RPT" button. The display will show "RPT". To turn off the repeat, press the button again.
Repeat entries in a folder
To play the recordings in the selected folder in a loop, press and hold the button (5) until you hear a beep.
Random selection of entries in a folder
To play the records of the current folder in random order, press the button (4). The display will show "RDM". To continue playing the record, press the button again.
Random folder selection
To select folders in random order, press and hold the button (4) until you hear a beep. The display will show "D-RDM". To continue playing the recording, press the button again.
Mini Disc Player
Switching to the mini-disc player mode is done by pressing button (11).
Removal MiniDisks
The discs are removed using button (17).
Loading MiniDiscs
Insert the mini disc into the slot and push it forward slightly.
Rewind
Press and hold the bottom of the button (13) to rewind or the top of the button (13) to fast forward. Rewinding will stop when you release the button.
Repeat recording
To play the current recording cyclically, press the (5) "RPT" button. The display will show "RPT". To turn off the program, press the button again.
Quick view
When you press the button (16), 10 seconds of each recording of the current disc are played in order; the display will show the inscription "SCAN". When you press the button again, the current melody will continue playing.
Random selection of records
To play the current disc's records in random order, press the button (4). The display will show "RDM". To continue playing the record, press the button again.
(The article was copied from the website HondaBook.ru)