Replacing a power mirror (Honda CR-V 2)

1. Lower the window completely.

2. Carefully pry up the mirror support cover (A) with your hand in the sequence shown.

3. Remove the door panel,

4. If necessary, remove the plastic cover, then remove the harness clamp (A) and disconnect the connector (B). Hold the mirror (C), unscrew the nuts, then remove the mirror. Don't scratch the door.

5. Install the mirror in the reverse order of removal. Make sure the connector is inserted properly.

[The text can be found on the website: www.HondaBook.ru]

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Mikhail Kopasov

◀ Previous

CR-V 2: Doors, locks and windows

Next ▶

Rear view mirrors
Adjusting the position of the front and rear side door latch hinge
Adjusting the position of the front and rear side door
Adjusting the position of the front and rear side door glass
Replacing the waterproof film in the rear side door guides

Replacing the mirror holder
Replacing the side mirror (on some models)
Replacing the rearview mirror
Windshield replacement
Replacing the windshield side trim clips