Note: Wear protective gloves.
1. Remove the following components:
- Door panel
- Plastic lid (if necessary)
2. Raise the glass fully.
3. Remove the screws and unhook the hooks (A), then remove the lock rod protective cover (B).
4. Remove the plug (A), then disconnect the outer handle rod (B).
5. Loosen the bolt, then remove the protective cover (A).
6. Loosen the bolt, then remove the spacer (A).
7. Pull the outer handle (A) towards you to remove the handle from the holes in the door panel. Don't scratch the door.
8. Installation of the outer handle is carried out in the reverse order of removal, taking into account the following.
- Make sure the traction is connected securely.
- Make sure the door locks and unlocks properly.