CR-V
1. Disconnect the battery from the ground.
2. Decompress the fuel system.
3. Fold back the rear seat, unscrew the screws and remove the seat frame cover.
4. Remove the floor panel and disconnect the connector from the pump.
5. Disconnect the hoses from the pump. To do this, squeeze and remove the clamp on one of the hoses, wring out the clamps and remove the crimp on the other hose.
6. Turn away nuts of a flange on a fuel tank and get the fuel pump.
7. Installation is carried out in the reverse order.
4-cylinder Odyssey
1. Disconnect the battery from the ground.
2. Decompress the fuel system.
3. Remove the fuel tank.
4. Disconnect the connector and hoses from the pump.
5. To disconnect the hoses, squeeze and remove the clamp on one of the hoses, depress the retainers, and remove the ferrule on the other hose.
6. Turn away nuts of a flange of the pump on a fuel tank and get the fuel pump.
7. Installation is carried out in the reverse order.
6-cylinder Odyssey
1. Disconnect the battery from the ground.
2. Decompress the fuel system.
3. Remove the rear seats and fold down the rear mat.
4. Remove the floor hatch and disconnect the connector from the pump.
5. Disconnect the hoses from the pump.
6. Turn away a ring nut and get the fuel pump.
7. Installation is carried out in the reverse order. When finished, fill the system with fuel by turning the ignition on and off several times (do not start the engine).