Models CR-V
1. Open the tailgate.
2. Press the side release buttons and remove the third brake light cover.
3. Disconnect the connector from the lamp by turning it 1/4 turn counterclockwise.
4. Pull and remove the rear turn signal bulb from its socket.
5. Installation is carried out in the reverse order.
4-cylinder Odyssey
1. Remove the left and right small rectangular covers of the LED brake light bar.
2. Remove 2 screws and remove the LED panel from the spoiler.
3. Disconnect the connector, remove the harness holder and remove the LED panel.
4. Installation is carried out in the reverse order.
6-cylinder Odyssey
1. Remove the small covers around the edges ' of the brake light.
2. Unscrew 2 screws and remove the cover from the rear cover.
3. Remove the bulb holder by turning it 1/4 turn counterclockwise.
4. Pull and remove the lamp.
5. Install the lamp in reverse order.