CR-V and 6-cylinder Odyssey
1. Turn the wheel so that the desired light is accessible (index).
2. Using a flat-blade screwdriver, remove the fasteners of the inner wheel arch panel and set aside the panel overlay.
3. Remove the bulb holder by turning it 1/4 turn counterclockwise.
4. To remove the turn signal/repeater bulb, press lightly on the base and turn counterclockwise.
5. On CR-V models, the direction indicator bulb comes directly from the socket.
6. Install in reverse order
4-cylinder Odyssey
1. Loosen the screw at the top of the lamp combination.
2. Move forward and remove the cover.
3. Remove the bulb holder by turning it 1/4 turn counterclockwise.
4. To remove the turn signal/repeater bulb, press lightly on the base and turn counterclockwise.
5. Installation is carried out in the reverse order.