Some of the fuses are located on the relay panel.
1. To access the fuse, remove the cover of the mounting block.
2. A blown fuse can be easily detected by its appearance. To replace a fuse, remove the faulty one and insert the new one by pushing it into the socket. First clean the connector contacts.
 |
 |
Fusible Links - Replacement
The fusible links are located in the mounting block in the engine compartment. A blown fuse indicates a fault in several circuits, or in a circuit related to the system.
1. Remove the mounting block cover.
2. Identify the burnt jumper by its appearance.
3. Insert the new jumper by pushing it into the socket. Replace contacts if they are seriously damaged.
Circuit breakers
The circuit breakers are located in the fuse box. After the circuit elements have cooled down, or the faulty element has been replaced, the contacts of the circuit breaker close again.
Direction indicator and hazard warning flasher - replacement
1. Remove the circuit breaker from its socket in the fuse box.
2. Check the condition of the breaker contacts.
3. Replace the breaker by pushing it into the socket.
(Full version on the source website «hondabook.ru»)