Note:
Checking the operation of the brake lights can be done as follows:
- Stop the car.
- Set the automatic transmission selector lever to position P and, without pressing the brake pedal, turn on the switch «CRUISE».
- Press and hold the switch «SET/DESEL» for more than 3 sec.
- Check if the brake lights come on briefly.
If the brake lights do not come on, go for a diagnosis without engaging the cruise control.
The IHCC system operates under the following conditions:
The automatic transmission selector lever is in positions «D», «D 3», «2».
The speed of movement is in the range of 65-100 km / h.
The windshield wiper does not work «H1».
The brake pedal is not pressed.
The system may not operate even under the above conditions in bad weather where distance measurement is not possible.
Note: If you place your foot on the accelerator pedal while the IHCC system is operating, the system will turn off and the IHCC indicator will turn on (Green colour), a beep will sound, the display will show «NO TARGET» and the system will turn off. If you take your foot off the gas pedal, the system will start up again and begin to control the movement.