Odyssey 4-cylinder models
1. Remove the left and right covers on both sides of the airflow unit at the top of the doorway by prying them off and off the latches.
2. Carefully wring out latches of the conditioner switch, disconnect a socket and remove the switch.
3. Remove the left and right covers at the edges of the intake and exhaust grilles.
4. Turn out self-tapping screws and remove lattices.
5. Disconnect from the bottom decorative panel hoses.
6. Remove 9 screws and remove the bottom panel.
7. Disconnect the connector, unscrew 4 screws and remove the fan.
8. Remove the bracket, unscrew the screws and remove the fan from the housing so that access to the screw securing the impeller to the motor shaft is formed.
9. Turn away the screw and remove the electric motor.
Odyssey 6-cylinder models
1. Remove the right rear side trim.
2. Disconnect connectors from motor and resistor pack.
3. Turn away screws of fastening of the electric motor to a body.
4. Remove the motor flange fasteners from the housing and remove the motor.