The selector has six positions − "P", "R", "N", "D", "S" And "L".
When switching, you need to press the lock.
No need to press when switching to the latch.
When switching, you need to press the lock and the brake pedal.
Position "R"
It is selected when the car is parked for a long time. In this position of the range select lever in the box, all controls are turned off, and its output shaft is blocked; vehicle movement is not possible. To move the selector to this position is permissible only at a complete stop. Move selector to position "R" while driving will damage the transmission.
Position "R"
Reverse. The selector can only be moved to this position when the vehicle is stationary. Translation of the selector into position "R" while moving forward, it can lead to failure of the gearbox and other transmission components.
Position "N"
Corresponds to neutral. In the gearbox, all controls are turned off, which ensures that there is no rigid kinematic connection between its drive and driven shafts. In this case, the output shaft blocking mechanism is disabled, i.e. the car can move freely. It is not recommended to move the selector to the position "N" while coasting (by inertia). Never turn off the ignition when driving downhill. This practice is dangerous because it could cause you to lose control of the vehicle.
Position "D"
Basic driving mode. It provides automatic shifting from first to fourth gear. In normal driving conditions, it is recommended to use it.
Position "S"
Recommended for use, for example, on winding mountain roads. In this range, the engine braking mode is effectively used. When braking the engine, move the selector to the position "S". Do not switch the automatic transmission selector at high speeds, this may lead to skidding and rollover of the vehicle or damage to the transmission.
Position "L"
This range allows maximum implementation of the engine braking mode. It is recommended when driving on steep descents, climbs and off-road.
When braking the engine, move the selector to the position "L". Do not switch the automatic transmission selector at high speeds, this may cause the vehicle to skid and roll over or damage the transmission.