Precautions when working with electrical equipment of the body 1. Before performing work on electrical equipment, disconnect the cable from the negative terminal of the battery. 2. If it is necessary to disconnect the battery for a check or repair, first of all disconnect the cable...
Replacement of body electrical equipment fuses 1. Before servicing, turn off the ignition and all electrical appliances. 2. Install fuses only of the regulated current rating. Note: Do not use a higher rated fuse or any other items ("bugs") instead of a blown fuse....
Connector identification Designation of connectors, their numbering and numbering of connector pins (see picture).
Location of relay and fuse boxes Relay box in the engine compartment. 1 - block of the supply voltage control system, 2 - relay block, 3 - cooling fan relay, 4 - horn relay, 5 - condenser fan relay, 6 - relay of the electromagnetic clutch of the air...
Wires and ground points Wires and grounding points. 1 - ground point "G2", 2 - starter wire, 3 - battery ground wire, 4 - ground point "G1", 5 - ground point "G3", 6 - transmission ground wire, 7 - engine ground wire. Wires and grounding...
Battery — check Attention: Do not test near fire or hot objects. If safety precautions are not followed, the battery may explode and cause injury to others. 1. Make sure the temperature of the battery electrolyte is 15-38°C. 2. Check...
Relay test 1. Relay check. A) Reverse lamp relay. b) Starter relay. V) Power window relay. G) Dimension relay.. d) Fog lamp relay. e) Heater fan motor relay. and) Horn relay. h) Headlight relay. And) Cooling fan motor relay. To)...
Ignition lock — check Attention: before performing the check, study the location of the SRS elements to comply with safety measures. 1. Make sure the ignition switch is in the "OFF". 2. Disconnect the battery terminal. 3. Remove the steering...
Relay and fuse box Table. Fuse block. Table. Relay and fuse box (continuation). Table. Relay box in the engine compartment. Table. Relay box in the engine compartment.
Instrument Cluster — Device instrument cluster (components and connectors). 1 - connector "A", 2 - connector "IN", 3 - connector "WITH", 4 - tachometer, 5 - speedometer, 6 - indicator of the amount of fuel, 7 - high coolant temperature indicator,...
Instrument Cluster — Check 1. Low coolant temperature indicator / high coolant temperature indicator. A) Check the indicator "CHECK ENGINE". During the operation of the indicator, the fault diagnostics mode is enabled; If the indicator does not...
Lighting system — device The location of the elements of the lighting system. 1 - relay block, 2 - headlight relay, 3 - fog lights, 4 - lights (front dimensions, front direction indicators, repeaters of direction indicators). The location of...
Lighting system — check 1. Checking the fog lamp switches, direction indicators and lighting control switch. A) Remove the steering column cover. b) Disconnect the low/high beam switch lead from the connector lead "16Р". V) Loosen the two...
Direction indicators and alarms — check 1. Checking the instrument cluster connector. A) Remove the instrument cluster. b) Disconnect connector "20Р" instrument clusters. V) Check according to the table "Checking the instrument cluster connector". If, as a...
Front interior lamps 1. Checking and replacing the front interior lighting lamp. Sunroof Models A) Set the switch to position "OFF" and remove the glass (A). b) Remove two screws. V) Disconnect connector "4P" (IN) and remove the case...
Rear interior lamps The location of the interior lighting elements. 1 - luggage compartment lighting lamp, 2 - local illumination lamp (models with sunroof and without sunroof), 3 - interior lighting lamp (models without sunroof), 4 - rear...
Backlight Control System — Device The location of the elements of the backlight control system. 1 - rear left door limit switch, 2 - rear interior lighting lamp (sunroof models), 3 - interior lighting lamp (models without sunroof), 4 - local...
Backlight control system — check 1. Checking the backlight control system. A) Remove a combination of devices and disconnect sockets. b) Check the system as shown in the table "Checking the backlight control system". If the system does not work...
Central locking and central locking remote control system — device Central locking and central locking remote control system. 1 - fuse block, 2 - relay for central locking / unlocking the fuel filler flap, 3 - relay for central locking / blocking the fuel filler flap, 4 - sensor for...
Central locking and central locking remote control system — check 1. Checking the remote control system of the central lock. A) Remove a combination of devices and disconnect sockets. b) Check the system as shown in the table "Checking the remote control system of the central lock"...
Key left in the ignition and lights off warning system 1. Remove a combination of devices and disconnect conclusions. 2. Check as shown in the table "Checking the warning system about the key left in the ignition and the lights on". If the result is not as described,...
Power windows — device Power windows. 1 - power window relay, 2 - fuse block, 3 - switch for controlling the power window of the front passenger door, 4 - front passenger door limit switch, 5 - power window driver's door, 6 - main power...
Power windows — check Vehicle check 1. Checking the main power window control switch. A) Remove the main power window switch. b) Disconnect connector "20Р" from the switch. V) Check as shown in the table "Checking the main power window...
Electric sunroof — check 1. Checking the functioning of the sunroof electric drive. A) Remove an internal covering of a roof. b) Disconnect sunroof control unit (A) from connector "5Р" (IN). V) Check as shown in the table "Check of functioning...
Sunroof electric drive — device Electric sunroof. 1 - sunroof control switch, 2 - open / close switch (raising / lowering) hatch, 3 - hatch control unit, 4 - sunroof drive switch, 5 - hatch opening relay (L/R, G/O, R/Y, B, Y), sunroof closing relay...
Door switches Table. The limit switch of a door of the forward passenger. Table. Rear right door limit switch. Table. Rear left door limit switch.
Accessory Connector — Replacement 1. Disconnect the accessory connector (A). 2. Remove the ring (IN) from the center console and disconnect the connector "2R" (WITH). 3. Installation is made in an order, the return to removal. Adjust the groove of the...
Sound signal — check 1. Checking the sound signal. A) Remove the front bumper. b) Disconnect connector "1R" (IN) sound signal and remove the siren. V) Apply battery voltage to the siren terminals as shown in the figure and check that the...
Rear window heater — check 1. Checking the rear window defroster switch. A) Remove the center panel. b) Disconnect connector "5Р" (A) and remove the switch (IN). V) Check the continuity between the terminals in each switch position as shown in...
Power mirrors — device Power mirrors. 1 - switch for adjusting the position of the mirrors.
Power mirrors — check Checking the right and left rear-view mirrors Note: before starting this test, check the fastening of the fuses of the fuse box No. 22 (7.5 A). 1. Remove the mirror adjustment switch (A). 2. Disconnect the connector...
Windshield wipers and washers — check 1. Checking the windshield/rear window wiper control switch. A) Remove the steering column cover. b) Loosen the two screws and remove the switch. V) Carry out checks as shown in the table "Checking the windshield/rear...
Windshield wipers and washers — adjustment 1. When stopping the wiper arm in the automatic stop position, make sure that this position is as described. Windshield. Back glass. Wiper arm stop position. *1 - adjustment, can also be made along the lower section of...
Audio system — device Audio system. 1 - audio system unit, 2 - front door edit speaker, 3 - right rear door speaker, 4 - left front door speaker, 5 - left rear door speaker, 6 - output "AUX IN". Audio system. 1, 6 - antenna power, 2 -...