2. To remove the front left fender fairing, remove the washer reservoir.
3. Open the front door. From the outside of the door, remove the upper clip and from the inside of the door, remove the lower clip securing the front fender fairing (A) and the front fender (B).
4. From the wheel well, remove the clip (A) and release the clip (B), then remove the front fender fairing (C). If the fairing is pinched by the side turn signal light harness, disconnect the connector (D).
5. Installation of the wing fairing is performed in the reverse order of removal, taking into account the following:
- Replace damaged clamps.
- Before installing the clamps at the top and bottom of the door, install the front fender fairing (A) onto the front fender (B) as shown in the illustration.
