Radio
1. Disconnect from the battery at first a negative wire, then positive.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove the radio assembly trim (see chapter Body).
3. Turn out fixing screws and take a radio receiver from the socket in the panel of devices, disconnect an electroconducting and an aerial cable from assembly. Remove the radio.
4. Installation is carried out in the reverse order.
Front main speakers
1. Remove the front door upholstery panel (see chapter Body).
2. Turn out fixing screws, take assemblage of a loudspeaker from the landing nest and disunite a socket of electroconducting.
3. Installation is carried out in the reverse order.
Rear speakers
1. Inside the luggage compartment, remove the screws securing the decorative speaker covers.
2. In the car, remove the decorative grille and give the screws securing the loudspeaker to the rear shelf. Disconnect the electrical connector and remove the loudspeaker.
3. Installation is carried out in the reverse order.
Tweeters
1. In addition to the standard door and rear speakers, the vehicles in question are equipped with tweeters mounted on top of the instrument panel. The speakers are removed from the panel by prying them with a screwdriver. Disconnect the electrical connector and remove the speaker.
2. Installation is carried out in the reverse order.