Ventilation and heating of the car interior Honda Accord 3
Heater Radiator — Accord 1984-85
1. Drain the coolant from the bottom hole of the radiator and collect for reuse. The drain pan is placed under the hose connection of the heat-insulating partition, pay attention to the location of the hoses, and then...
1. Drain the coolant from the bottom hole of the radiator and collect for reuse. The drain pan is placed under the hose connection of the heat-insulating partition, pay attention to the location of the hoses, and then...
Heater Radiator — Accord 1986-89
1. Drain the coolant from the bottom hole of the radiator and save it for reuse. The drain pan is placed under the hose connection on the heat-insulating partition, pay attention to the location of the hoses, and then...
1. Drain the coolant from the bottom hole of the radiator and save it for reuse. The drain pan is placed under the hose connection on the heat-insulating partition, pay attention to the location of the hoses, and then...
Heater Radiator — Accord 1990-91
1. Drain the coolant from the engine. 2. Mark and disconnect the heater hoses at the firewall. Be prepared to collect any spilled coolant from the hoses and joints. 3. Disconnect the control cable from the heater valve....
1. Drain the coolant from the engine. 2. Mark and disconnect the heater hoses at the firewall. Be prepared to collect any spilled coolant from the hoses and joints. 3. Disconnect the control cable from the heater valve....
Heater Radiator — Prelude 1984-87
It is NOT necessary to remove the instrument panel. 1. Drain the coolant from the cooling system. Remove the caps and clamps from the heater pipes. 2. Remove the cover from the heater hose (inside the cabin) and the...
It is NOT necessary to remove the instrument panel. 1. Drain the coolant from the cooling system. Remove the caps and clamps from the heater pipes. 2. Remove the cover from the heater hose (inside the cabin) and the...
Heater Radiator — Prelude 1988-91
1. Drain the coolant from the engine. 2. Mark and disconnect the heater hoses on the insulation partition. 3. Disconnect the heater valve cable from the heater valve. 4. Remove the instrument panel. 5. Remove the heater...
1. Drain the coolant from the engine. 2. Mark and disconnect the heater hoses on the insulation partition. 3. Disconnect the heater valve cable from the heater valve. 4. Remove the instrument panel. 5. Remove the heater...
Heater control valve — removal and installation
The heater control valve for the 1984-85 Accord is mounted to the side of the heater housing in the vehicle. All others are mounted to the firewall in the engine compartment. When removing and installing the valve, be...
The heater control valve for the 1984-85 Accord is mounted to the side of the heater housing in the vehicle. All others are mounted to the firewall in the engine compartment. When removing and installing the valve, be...
Heater control and fan switch
Accord 1984-85 1. Remove the temperature control slider and fan control knobs. 2. Remove the instrument panel cover. 3. Remove the upper and lower steering column mounting brackets. 4. Remove the center console and...
Accord 1984-85 1. Remove the temperature control slider and fan control knobs. 2. Remove the instrument panel cover. 3. Remove the upper and lower steering column mounting brackets. 4. Remove the center console and...
Push-button controls
1. Remove the temperature and fan control knobs. 2. Remove the heater control panel cover. 3. Remove the instrument cluster panel. 4. Remove the center air outlet. 5. Unscrew the 4 screws securing the pushbutton block...
1. Remove the temperature and fan control knobs. 2. Remove the heater control panel cover. 3. Remove the instrument cluster panel. 4. Remove the center air outlet. 5. Unscrew the 4 screws securing the pushbutton block...
Lever or Slider Controls — 1986-89 Accord
1. Remove the handles from the control levers. 2. Remove the cover from the control panel. 3. Remove the radio. 4. At this stage, the temperature control/mode switch levers, recirculation switch or fan control switch...
1. Remove the handles from the control levers. 2. Remove the cover from the control panel. 3. Remove the radio. 4. At this stage, the temperature control/mode switch levers, recirculation switch or fan control switch...
Lever or Slider Controls — 1990-91 Accord
1. Remove the ashtray. Remove the center console. 2. Remove the coin box, air ducts and ashtray light bracket. 3. Remove the instrument panel switches to the left and right of the steering wheel. 4. Remove the car...
1. Remove the ashtray. Remove the center console. 2. Remove the coin box, air ducts and ashtray light bracket. 3. Remove the instrument panel switches to the left and right of the steering wheel. 4. Remove the car...
Lever or Slider Controls — Prelude 1984-87
1. Disconnect the heater control unit harness. 2. Remove the temperature control unit by unscrewing the four screws. First, unscrew the lower screws. 3. Remove the air outlet together with the control unit by unscrewing...
1. Disconnect the heater control unit harness. 2. Remove the temperature control unit by unscrewing the four screws. First, unscrew the lower screws. 3. Remove the air outlet together with the control unit by unscrewing...
Lever or Slider Controls — Prelude 1988-91
1. Remove the center console. 2. Remove the car radio. 3. Unscrew the two screws from the bottom of the central air duct and remove the air duct unit. 4. Disconnect the air mixer cable from the heater. 5. Unscrew the 4...
1. Remove the center console. 2. Remove the car radio. 3. Unscrew the two screws from the bottom of the central air duct and remove the air duct unit. 4. Disconnect the air mixer cable from the heater. 5. Unscrew the 4...
Heater or Heater/Air Conditioner Blower Motor
1984-89 Accord, 1984-1987 Prelude 1. Remove the glove box. 2. Disconnect the fan sleeve between the heater box and the fan. 3. Disconnect the electrical wiring and vacuum hose from the fan. 4. Unscrew the three mounting...
1984-89 Accord, 1984-1987 Prelude 1. Remove the glove box. 2. Disconnect the fan sleeve between the heater box and the fan. 3. Disconnect the electrical wiring and vacuum hose from the fan. 4. Unscrew the three mounting...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to the guide
- User manual
- Maintenance
- Power unit
- Four-cylinder engines
- Six-cylinder engines
- Engine overhaul
- Cooling system
- Heater and air conditioner
- Power and exhaust systems
- Engine electrical equipment
- Engine management
- Transmission
- Mechanical gearbox
- Automatic gearbox
- Clutch and drive shafts
- Chassis and running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Engine adjustment
- Engine repair
- Engine electrics
- Emission management
- Engine management (carburetor)
- Electronic injection
- Programmable injection
- Schematic of emission system
- Fuel system
- Feedback management
- Transmission
- Manual gearbox
- Automatic gearbox
- Clutch
- Chassis and running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Ventilation and heating
- Air conditioner
- Cruise control system
- Equipment and devices