Gearbox Specifications 5-speed manual gearbox Tightening torques for threaded connections N·m Fasteners of assembly of the amplifier of the power unit Bolts 10 mm 45 Bolts 12 mm 64 Subframe mounting bolts Bolts 12 mm 64 Bolts 14 mm 102 Bolts...
5-speed manual gearbox (RCP) 4-cylinder models are equipped with a 5-speed manual gearbox (RKPP), or 4-speed automatic transmission (AT). All V6 models are equipped with AT. The manual transmissions used on the considered models of Honda Accord...
Replacement of power shaft seals 1. Gear oil leaks are most often associated with wear or mechanical damage to the drive shaft seals. Replacing the oil seals is quite simple and does not require removing the transmission from the car. 2. Oil seals are...
Removal and installation of a drive and the gear lever Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if...
Check and replacement of the gauge-switch of reversing lights Examination 1. First of all, check the condition of the No. 9 10 A fuse in the fuse/relay box under the vehicle dashboard. Replace the blown fuse with a new one. If the new fuse also blows immediately (without reverse...
Removal and installation of a mechanical transmission Withdrawal 1. Disconnect both wires from the battery (first negative). Remove the battery and its support tray (see chapter Engine electrical equipment ). Attention! If the stereo system installed in the car is equipped...
Overhaul of a mechanical box — general information The compilers of this Guide do not recommend car owners to undertake the overhaul of manual transmissions on their own. During the disassembly and assembly procedures, the gearbox has to be removed and then replaced...