Main switch — removal and installation 1984-85 Accord, 1984-87 Prelude The system ON/OFF switch can be easily removed from the dashboard. Disconnect the wires on the back of the panel, then remove the switch. 1986-89 Accord Remove the fuse box cover to...
Control unit — removal and installation 1984-85 Accord and 1984-87 Prelude The ACCORD control unit is located behind the left panel behind the instrument cluster. To remove it, unscrew the mounting bracket and carefully slide it down. Other regulators are...
Switch — set / resume (set / resume) Contact ring The slip ring allows the contacts to work in any position of the steering wheel. The slip ring can be accessed by removing the steering wheel. Disconnect from the connectors and remove the slip ring...
Brake light switch, clutch pedal switch Withdrawal These switches send electrical signals to the control unit to disable the cruise control function when either pedal is depressed. The switches are located on the corresponding pedals, in the upper part. The...
Drive, drive cable — Accord 1984-85, Prelude 1984-87 1. Pull off the rubber boot and loosen the locknut. 2. Disconnect the end of the cable from the drive shaft. 3. Disconnect the drive cable from the drive bracket 4. Rotate the sleeve on the thermal barrier by 90°and...
Drive, drive cable — Accord 1986-91, Prelude 1988-91 1. Pull off the rubber boot and loosen the locknut. 2. Disconnect the end of the cable from the drive shaft. 3. Disconnect the connector and vacuum hose from the control valve. Release the ventilation hose from the...