Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to avoid injury from accidental deployment (see Section Airbags - General Information). The SRS circuit wiring is easily identified by the yellow color of the insulation.
1. Disconnect the electrical connectors and remove the lamp holder assemblies with the lamps installed in them (see Section Replacing headlight bulbs).
2. Remove the front bumper cover (see Chapter Body).
3. Loosen the fasteners and remove the headlight assembly from the vehicle.
 |
 |
4. Installation is carried out in the reverse order. After completing the procedure, do not forget to adjust the direction of the optical axes (see Section Adjusting the direction of the optical axes of the headlights).