Car clutch repair Honda Accord 3

Clutch assembly — removal and installation
1. Disconnect the negative battery cable. Raise and support the vehicle securely with stands. Remove the transmission from the vehicle. Mark the relative positions of the flywheel and clutch for subsequent assembly. 2....

Pedal Height and Freeplay Adjustment — 1984-89 Accord, 1984-87 Prelude
1. Measure the height when the pedal is released. 2. Measure the pedal free play. 3. Adjust the pedal free play by turning the clutch cable adjusting nut. The nut is located at the end of the cable housing near the...

Pedal Height and Freeplay Adjustment — 1990-91 Accord, 1988-91 Prelude
The clutch has a self-adjusting property to compensate for its wear. The full free travel of the clutch pedal is in the range of 9-15 mm. If there is no clearance between the piston of the master cylinder and the...

Clutch cable — removal and installation
1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the end of the cable from the clutch pedal. 3. Remove the adjusting nut assembly from its mounting. 4. Raise and securely support the...

Clutch Master Cylinder — Removal and Installation
1. Disconnect the negative battery cable. Remove the cotter pin at the top of the clutch pedal and pull the pivot pin out of the bracket. 2. Loosen the nuts and bolts securing the clutch master cylinder and remove the...

Clutch hydraulic slave cylinder — removal and installation
1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the clutch hose from the slave cylinder and plug it. 3. Unscrew the two fixing bolts and remove the slave cylinder. 4. Installation is...

Bleeding the clutch hydraulic system
The system must be bled every time it is disassembled or in case of a leak. The bleed screw is located on the working cylinder. 1. Remove the screw protective cover. 2. Attach a clean hose to the bleed screw. Place the...