Cabin Air Conditioner Honda Accord 3
Air Conditioning Compressor — Accord 1984-89, Prelude 1984-87
1. Start the engine in idle mode and turn on the air conditioning system for a few minutes. 2. Turn off the air conditioning system and the engine. Disconnect the negative battery terminal and disconnect the compressor...
1. Start the engine in idle mode and turn on the air conditioning system for a few minutes. 2. Turn off the air conditioning system and the engine. Disconnect the negative battery terminal and disconnect the compressor...
Air Conditioning Compressor — Accord 1990-91
1. Run the engine in idle mode for several minutes with the compressor on. 2. Turn off the engine and compressor. Disconnect the cable from the negative battery terminal. 3. Carefully drain the refrigerant. 4. Remove...
1. Run the engine in idle mode for several minutes with the compressor on. 2. Turn off the engine and compressor. Disconnect the cable from the negative battery terminal. 3. Carefully drain the refrigerant. 4. Remove...
Air Conditioning Compressor — Prelude 1988-91
1. Run the engine in idle mode for several minutes with the compressor on. Turn off the engine and compressor. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Loosen the idler...
1. Run the engine in idle mode for several minutes with the compressor on. Turn off the engine and compressor. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Loosen the idler...
Air Conditioner Condenser — Accord 1984-85
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the condenser. 4. Remove the front splash shield or mudguard from under the front of the...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the condenser. 4. Remove the front splash shield or mudguard from under the front of the...
Air Conditioner Condenser — Accord 1986-89
1. Disconnect the cable from the negative battery terminal. 2. Remove the hood latch assembly, but do not disconnect the hood release cable. Place the assembly on the engine, outside the work area. 3. Carefully drain...
1. Disconnect the cable from the negative battery terminal. 2. Remove the hood latch assembly, but do not disconnect the hood release cable. Place the assembly on the engine, outside the work area. 3. Carefully drain...
Air Conditioner Condenser — Accord 1990-91
These procedures are not performed on a cold engine. 1. Carefully drain the refrigerant. 2. Temporarily remove the refrigerant receiver-dryer and tube. Remove the suction line bracket. 3. Remove the front grille. Remove...
These procedures are not performed on a cold engine. 1. Carefully drain the refrigerant. 2. Temporarily remove the refrigerant receiver-dryer and tube. Remove the suction line bracket. 3. Remove the front grille. Remove...
Air Conditioner Condenser — Prelude
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. On 1984-87 vehicles, remove the grille. On later vehicles, remove the front bumper. 4. On 1988-91 vehicles, remove the...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. On 1984-87 vehicles, remove the grille. On later vehicles, remove the front bumper. 4. On 1988-91 vehicles, remove the...
Evaporator Core, Expansion Valve and Thermostat — 1984-85 Accord
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Support the joints with a...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Support the joints with a...
Evaporator Core, Expansion Valve & Thermostat — 1986-89 Accord
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with a...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the coolant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with a...
Evaporator Core, Expansion Valve & Thermostat — 1990-91 Accord
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with...
Evaporator Core, Expansion Valve and Thermostat — Prelude
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with...
1. Disconnect the cable from the negative battery terminal. 2. Carefully drain the refrigerant. 3. Disconnect the line and hose from the evaporator joints on the firewall in the engine compartment. Hold the joints with...
Fan switch and instrument panel
The air conditioner controls - a regular switch, a temperature control and a fan switch - are located on the heater instrument panel. Removal and installation of the heating device described above .
The air conditioner controls - a regular switch, a temperature control and a fan switch - are located on the heater instrument panel. Removal and installation of the heating device described above .
Mains and hoses
The metal high-pressure lines and hoses used on HONDA vehicles are precisely fitted to their places. Each hose has a specific shape and length, equipped with metric nozzles, which makes it necessary to use a strictly...
The metal high-pressure lines and hoses used on HONDA vehicles are precisely fitted to their places. Each hose has a specific shape and length, equipped with metric nozzles, which makes it necessary to use a strictly...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to the guide
- User manual
- Maintenance
- Power unit
- Four-cylinder engines
- Six-cylinder engines
- Engine overhaul
- Cooling system
- Heater and air conditioner
- Power and exhaust systems
- Engine electrical equipment
- Engine management
- Transmission
- Mechanical gearbox
- Automatic gearbox
- Clutch and drive shafts
- Chassis and running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Engine adjustment
- Engine repair
- Engine electrics
- Emission management
- Engine management (carburetor)
- Electronic injection
- Programmable injection
- Schematic of emission system
- Fuel system
- Feedback management
- Transmission
- Manual gearbox
- Automatic gearbox
- Clutch
- Chassis and running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Ventilation and heating
- Air conditioner
- Cruise control system
- Equipment and devices