Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if it is accidentally deployed (see Section Airbags - general information). SRS circuit wiring is easily identified by the yellow color of the insulation.
1. Disconnect from the battery at first a negative wire, then positive.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove the dashboard trim (see chapter Body).
3. Turn out fixing screws, carefully take out a combination of devices from the socket in the panel and disunite electric sockets from a back side of assembly.
4. Installation is carried out in the reverse order. Don't forget to connect the battery (positive wire first, then negative).