Replacing the fuses of the electrical equipment of the body (Honda Fit 1)

1. Before servicing, turn off the ignition and all electrical devices.

2. Install fuses only with the specified current rating.

Note: Do not use a fuse with a higher amperage rating or any other objects ("bugs") in place of a blown fuse. This may cause more serious damage or a fire.

3. Remove and install the fuse only with a straight movement, do not twist or swing it. Otherwise, the contacts may move too wide, and the fuse will not hold in them. If the fuse burns out again after replacement, check the circuits for breaks and short circuits.

(Article source on the website: HondaBook.ru)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Varvara Vereshchagina

◀ Previous

Fit 1: Equipment and devices

Next ▶

Precautions when working with electrical equipment of the body

Identification of connectors
Location of relay and fuse boxes
Wires and grounding points
Battery — check
Checking the relay