Direction indicators and hazard warning lights — check (Honda Fit 1)

1. Checking the instrument cluster connector.

a) Remove the instrument cluster.

b) Disconnect the "20P" connector of the instrument cluster.

c) Perform a check according to the table "Checking the instrument cluster connector".

If the check reveals that the turn signals and hazard warning lights are not working properly, replace the instrument cluster;

2. Checking the hazard warning switch.

a) Remove the instrument cluster.

b) Turn the hazard warning switch to the released position and disconnect the connector.



c) Check the continuity between the terminals in each switch position as shown in the table.



Table. Checking the instrument cluster connector.





[The article was copied from the website «HondaBook»]