Note:
- Wear protective gloves.
- When pressing components with a flat-head screwdriver, wrap it with protective tape to avoid damage.
- Avoid bending or scratching the trim and panels.
Remove the following components, then remove the trim as shown:
- Finishing the rear door sill.
- Trunk floor mat, trunk floor lid, rear floor scoop, luggage tie-down hooks, rear trim panel.
- Electrical outlet (from the left rear side decorative panel).
Installation of the trim is carried out in the reverse order of removal, taking into account the following:
- Replace broken clamps.
- Make sure the seat belt is not pinched.