Note:
- When removing the rear bumper, it is a good idea to have a partner.
- Avoid scratching the rear bumper and body.
- When pressing components with a flat-head screwdriver, wrap it with protective tape to avoid damage.
- Wear protective gloves.
- To prevent damage to the rear bumper, apply protective tape around the side edge of the rear lid lower trim hinge.
- When removing the rear bumper, unscrew the bolt securing the rear door support pillar to the side of the body. After loosening the bolt, carefully open or close the rear door and achieve the required gap between the rear bumper and the lower trim of the rear door and securely fix them in this position.
Remove the rear bumper as shown in the picture.
The bumper is installed in the reverse order of removal, taking into account the following:
- Make sure the connectors are connected properly.
- Make sure the rear bumper is securely engaged with the side brace hooks and the top beams on both sides.
- Replace damaged clamps.
(Original material on the website: Hondabook.ru)