Attention.
- Be careful not to damage the body or the components to be removed.
- Work with gloves.
Do the work with an assistant.
While working with a screwdriver, protect the components with protective tape or a cloth. Also, wrap the screwdriver with tape so as not to damage the components.
Remove tail lights (see ch. electrical equipment) and remove the components shown in the figure in numerical order.
When installing the bumper, first fasten the side bumper spacers to the body, and then install the bumper on the latches. Complete the installation in the reverse order of removal.
- Install the bumper so that there are no steps relative to the body and lights.
- Check clips for damage and replace if necessary.