Contents: Speedometer ⇊ Total mileage indicator (odometer) ⇊ Current mileage indicator ⇊ Tachometer ⇊ Fuel level indicator ⇊ Coolant temperature gauge ⇊ Backlight control ⇊
Speedometer
Displays the current travel speed in (km/h) when the ignition key is in position II.
Total mileage indicator (odometer)
Models without IHCC system
Displays the total mileage of the vehicle (in km) when the ignition key is in position II.
Models with IHCC system
Displays the current mileage "TRIP A", "TRIP B" and the total mileage of the vehicle (in km) when the ignition key is in position II.
If you press the select/reset button briefly, the display will switch in the following sequence: "TRIP A" → "TRIP B" → Odometer → "TRIP A"...
Current mileage indicator
Models without IHCC system
When the ignition key is in position II, the current mileage "TRIP A" or "TRIP B" of the vehicle is displayed (in km).
If you press the select/reset button briefly, the display will switch in the following sequence: "TRIP A" → "TRIP B" → "TRIP A"...
You can count the distance traveled from the moment you started moving at (A), and the distance traveled, for example, after refueling at (B).
To reset the display to "0", press and hold the select/reset button for approximately 1 second. This resets the mileage currently displayed (e.g. the current mileage "TRIP A").
Models with IHCC system
When the ignition key is in position II, the current mileage "TRIP A", "TRIP B" or the total mileage of the vehicle (in km) is displayed.
If you press the select/reset button briefly, the display will switch in the following sequence: "TRIP A" → "TRIP B" → Odometer → "TRIP A"...
You can count the distance traveled from the moment you started moving at (A), and the distance traveled, for example, after refueling at (B).
To reset the display to "0", press and hold the select/reset button for approx. 1 sec. when "TRIP A" or "TRIP B" is displayed. The mileage currently displayed (e.g. the current mileage "TRIP A") is reset,
Tachometer
When the ignition key is in position II, the tachometer displays the engine speed per 1 minute.
Caution: Do not allow critical engine speeds, as this may cause engine failure. Pay special attention to engine speed when changing gears at high vehicle speeds.
If the engine speed of a stationary vehicle exceeds 5000/min, the fuel supply is stopped.
Fuel level indicator
When the ignition key is in position II, the fuel level in the tank is displayed.
If the fuel level approaches the "E" mark, refuel the vehicle immediately.
Coolant temperature gauge
Displays the engine coolant temperature (ignition key in position II).
If the cooling system is in normal condition, the "H" display does not flash.
Caution: If the display shown in the figure appears, the engine is probably overheated. In this case, park in a safe place and let the engine cool down, as continuing to drive may cause engine damage.
Backlight control
When the ignition key is in position II, the brightness of the instrument cluster can be adjusted.
The brightness of the instrument cluster changes with each press of the backlight control button.